Request list

is empty

You are here

TE-PNY1123 Accuvol Modified PUF Sampler

If you cannot find the part number in the documentation please provide detail. Specific to this item, it could include part number or application detail, (ex. 20 meters of cable, or 20 litres of volume)

Complete with anodised aluminium shelter, 8" x 10" stainless steel filter holder, 6" long spool PC with end caps (to hold foam), aluminium blower motor assembly, well type manometer, 7 day mechanical timer, filter media holder/filter paper cartridge, elapsed time indicator and mass flow controller (110v/60hz – 220v/50hz)

High Volume PUF Air Sampler for sampling large volumes of air for the collection of TSP and PUF

The TE-PNY1123 High Volume PUF Air Sampler is the recommended instrument for sampling large volumes of air for the collection of TSP (Total Suspended Particulate) and PUF. The physical design of the sampler is based on aerodynamic principles which result in the collection of particles of 100 microns (Stokes Equivalent Diameter) and less.

The TE-PNY1123 MFC PUF sampler consists of a TE-5001 Anodized Aluminium Shelter, TE-1004 PUF Aluminium Blower Motor Assembly, TE-5004 8”x10” Stainless Steel Filter Holder with probe hole, TE-5007 7-Day Mechanical Timer, TE-300-310 Mass Flow Controller, TE-5012 Elapsed Time Indicator and 6" round PUF spool piece.

APPLICATIONS
• Ambient air monitoring to determine suspended particulate levels relative to air quality standards.
• Impact of a specific source on ambient levels of suspended particulates by incorporating a "wind direction-activation" modification which permits the sampler to operate only when conditions are such that a source-receptor relationship exists.
• Monitoring of enclosed environments for relatively high levels of particulate matter, particularly toxic materials.
• Monitoring of emissions from large diameter vents where physical conditions preclude the use of conventional stack-testing equipment.

Ordering Information
TE-PNY1123 MFC PUF Anodized Aluminium Shelter with mounted Flow Controller, 7-Day Mechanical Timer, Blower Motor Assembly, ETI, Exhaust Hose and 8WT manometer. Please specify 110v/60hz or 220v/50hz

TE-PNY1123 Consumables
TE-1123-4 Foam 3” by 3 3/8” Dia. Poly Urethane Vapour Collection Substrate (10 per pack)
TE-1123-5 Glass Cartridge w/Stainless Steel Screens
TE-1123-6 Foam 3” x 3” Dia. to fit Glass Cartridge (10 per package)
TE-116125 Motor for 220V PUF System for 220V
TE-116336 Motor for 110V PUF System
TE-3000 Filter Media Holder/Filter Paper Cartridge 8” x 10”
TE-33378 Brushes (Set of 2) for 220V Motor TE-116312 and TE-116111 for 220V
TE-33384 Brushes (set of 2) for 110V Motor TE-116311 and TE-116336
TE-5005-4 Motor Cushion
TE-5005-9 Filter Holder Gasket (Between Filter and Blower Motor)
TE-5018 8" x 10" Gasket each (2 required)
TE-5028 Recommended for all TSP and PM 10 Systems. Variable Flow Calibration Orifice, NIST Traceable Calibration Certificate, Adapter Plate, Slack-Tube Manometer, Tubing and Carrying Case.
TE-QMA Micro-Quartz Filter Media 8" x 10" for PM-10 (25 per box)