Envco – Environmental Equipment

The objective of CPTu is:
• to estimate subsurface lithology and identify presence of groundwater
• to estimate geotechnical parameters CPTu helps to identify complex lithology In which further testing or sampling should be taken, which:
• reduces the cost and time of subsurface characterization
• reduces the number of soil borings needed

CPTu System (Piezocone)
The CPTu system provides fast, accurate, real time data acquisition and interfaces easily with many direct push drill rigs. Soil parameters measured by the CPTu system include:
• Tip Pressure
• Pore Pressure
• Sleeve Pressure

This system is designed for a use in a variety of conditions encountered in agricultural, geotechnical, and environmental applications. The CPTu system provides the high resolution data in a compact, light weight, and cost-effective package.

Ordering Information
Basic CPTu System
C-MONTM
90000 C-MONTM Complete* (No Laptop Computer Needed!)
Measures tip, pore and sleeve pressure. (Data Logger, CPTu Software, Cable for Power and Depth Transducer, Transport Box/Case, and Down-Pressure Sensor Setup.)

10 TON MEMOCONE III
90001 Memocone III (MC-III) Complete 100 Mpa - 10 Ton (Memory and Acoustic)
Measures tip, pore and sleeve pressure PLUS inclination, depth and rate of penetration. (MC-III, 4-channel CPTu Probe (Qc; Fs; u, and inclination), Sound Transmitter, Data Interface Including Software, Microphone, Battery Plug, Cable, Point Slot Filter/Tip, Transport Box, Depth Transducer - roller type, and Inclinometer)

SET UP
5678.00 AMS Setup and adaptation (12v adapter for C-MON™ adapter/receiver for connection to an external battery, sun shield for C-MON™, hard-shell case for C-MON™ or PC-MONTM , heavy-duty caulk/grease gun, five (5) C-size alkaline batteries, SUB Drive 256 MB with Protector Cap, Cleaning Brush, and O-Ring Pick set for MC-III)

SOFTWARE
4321.00 CPT-pro (Geosoft) Interpretation module with CPTu Explorer
Various options available for this software, see next page for details.

ANCHORING SYSTEM
3000.09 Complete Dual Point Anchoring System

Basic CPTu System Options
PC-MONTM
90002 PC-MONTM Complete (Laptop Computer Needed!)
Measures tip, pore and sleeve pressure. (Data Logger, CPTu Software, Cable for Power and Depth Transducer, Other Miscellaneous Cables for PC-MonTM and Down-pressure Sensor Setup)

5 TON MEMOCONE III
90002 Memocone III (MC-III) Complete 50 Mpa - 5 Ton (Memory and Acoustic)
Measures tip, pore and sleeve pressure PLUS inclination, depth and rate of penetration. (MC-III, 4-channel CPTu Probe (Qc; Fs; u, and inclination), Sound Transmitter, Data Interface Including Software, Microphone, Battery Plug, Cable, Point Slot Filter/Tip, Transport Box, Depth Transducer - roller type, and Inclinometer)

Seismic CPTu Options
9210.01 Uni-Axial Seismic Module
(Uni-Axial Module, Two (2) Geophones, and 50 Meters of Cable)

9210.02 Tri-Axial Seismic Module
(Uni-Axial Module, Two (2) Geophones, and 50 Meters of Cable)

9234.01 Seismic Analysis Software (Baziw SC1-RAV (BCE uni-axial spectral analyses software)
OR
9234.02 Seismic Analysis Software (Baziw SC3-RAV (BCE tri-axial spectral analyses software)