Solinst Model 601 Standpipe Piezometers
The Solinst Model 601 Standpipe Piezometer is designed to be placed within a drilled hole to provide a filtered inlet point. The pointed PVC tip is also suitable for pushing into very loose sands at the base of a borehole, a stream, or into very loose tailings pond sediments.
Model 601 Standpipe Piezometer is designed to be placed within a drilled hole
The 601 is excellent for metals sampling, as it is composed of a preformed Vyon tube set inside a perforated PVC piezometer tip. The Model 601 is well suited for water level monitoring, permeability measurements, construction control, de-watering drainage operations, and slope stability investigations.
Ideal for:
• Water level monitoring
• Construction control
• Slope stability investigations
• Soil gas monitoring
• Permeability measurement
• De-watering/drainage operations
• Metals monitoring
• Soil Gas Sampling
The 601 tip connects to the surface with 3/4” ID PVC riser pipe using slip-fit couplings. Reducer couplings can also be used to connect to other sizes of riser pipe or casing. The standard 601 Piezometer tip lengths available are: 6”, 1 ft, 2 ft and 3 ft (15 cm, 30 cm, 60 cm and 90 cm).
Filter Specifications
• Porous HDPE (Vyon)
• Seams are butt heat welded
• Average pore size 60 microns
• Keeps out silts and fine sands
Solinst also offers the Model 615 stainless steel Drive-Point Piezometer, which is designed to be pushed into the soil below the bottom of a borehole. They can also be driven directly into the ground from the surface.
Ordering Information
102433 6” Piezometer
100396 1ft Piezometer
101557 2ft Piezometer
100938 3ft Piezometer
Use the request button on product pages to build a quote request list.
| 0 Items | $0.00 |
Freephone
- Australia
- 1800 622 343
- New Zealand
- 0800 623 336