Envco – Environmental Equipment

The CyberScan Series PC 510 meter is equipped with an Application Specific Integrated Circuit (ASIC). The ASIC microprocessor provides a high level of sophistication with several advanced features, while maintaining a user-friendly interface.

USER CUSTOMIZATION
The CyberScan PC 510 Multi-parameter meter permits user-customization of the following functions:
• Stability
• Unit of temperature measurement (°C/°F)
• Temperature Coefficient
• Normalization Temperature
• Selection of pH buffer standards.

MULTI-PARAMETER MEASUREMENT
The CyberScan PC 510 measures pH, Conductivity, TDS with temperature. The mV mode is usefulfor electrode diagnosis.

MULTI-POINT PUSH BUTTON CALIBRATION
The PC 510 allows up to 5-point pH calibration and 5-point Conductivity/TDS calibration (one point per range). This improves accuracy and linearity across all ranges. Auto-buffer recognition with the choice of USA or NIST buffer standards makes pH calibration procedure simple and easy. Built-in Automatic Temperature Compensation guarantees high accuracy levels under varying temperature conditions.

AUTO-RANGING
The PC 510 meter is quick to detect and switch to appropriate Conductivity & TDS measuring range, thus eliminating guesswork.

EASE OF USE
Temperature Coefficient, Normalization Temperature & TDS values can be manually keyed in for accurate measurements. Auto-Hold function automatically freezes value when reading stabilizes and user can manually activate HOLD function via keypad to momentarily freeze readings for later reading and recording.

EASY-TO-READ DISPLAY
The large LCD (Liquid Crystal Display) shows both primary (pH or Conductivity) and secondary (temperature) values measured, complete with mode and units of measure. Graphic symbols and self-diagnostic message codes, such as condition of electrode, provide user comprehensive information for easy and trouble-free operation.

CONDUCTIVITY & pH ELECTRODE WITH BUILT-IN TEMPERATURE SENSOR
The conductivity electrode has a built-in temperature sensor and is specially designed to minimise bubble entrapment during measurement. The rugged epoxy body pH electrode has a polymer gel which is non-degradable and resistant to bacterial and fungal attack. In addition, the doublejunction pH electrode has the reference element isolated within a second chamber, minimizing contamination, and extending useful life of the electrode.

INNOVATIVE DESIGN
A handy slide-out instruction card serves as a reference guide for keypad functions and troubleshooting. Keypad is splash-proof to protect the meter from accidental spills. Tactile feedback during operation confirms key selection. Non-skid rubber pads immobilise meter during operation. A built-in electrode holder provides table top convenience and is a space saver.

Ordering Information
EC-PCWP510/03S CyberScan PC 510 meter with EC-FE72522-01B, EC-CONSEN91W and integral electrode stand

EC-FE72522-01B Epoxy body double junction pH electrode (1m cable)
EC-CONSEN91W Plastic body Conductivity electrode (k=1.0) with 2 stainless steel rings and built-in temperature sensor
EC-PHWPTEM-01W Temperature probe
EC-120-ADA AC / DC power adapter (120 VAC, 50/60 Hz)
EC-220-ADA AC / DC power adapter (220 VAC, 50/60 Hz)