Envco – Environmental Equipment

With the MiniSampler PE the sample liquid only comes into contact with the suction hose and the sample bottle. the possibility of cross-contamination is greatly reduced therefore. Immediately after having taken the sample, the bottles are sealed using an airtight cap and with tamper-evident safety ring seal.the single-use, flexible, suction hose can be quickly replaced, thus ensuring that the samples are never contaminated. If necessary, a new hose can be used for every single sample. Due to its small diameter (8 mm) and flexibility the hose can reach sampling areas which are otherwise inaccessible.

Also suitable for viscous oils
Not for aggressive acids. Vapors could destroy pump.

MiniSampler PE complete with accessories in transport case. Contents:

Vacuum pump
• 10 PE bottles 100 ml
• 10 m PE suction hose 6 x 8 mm
• 1 hose cutter
• 1 hose weight made of stainless steel AISI 304
• 20 seal-it bottle seals

Operation
1. Place hose and bottle in pump.
2. Insert hose end to desired sample depth.
3. Move the pump piston back and forth and collect the sample. The liquid flows directly into the bottle.
4. Take off the filled bottles, close and label them.

Ordering Information
Mini Sampler case, PE
5305-0100 Mini Sampler case, PE

Accessories
0340-0100 Sample bottle, PE, 100 ml
0340-0250 Sample bottle, PE, 250 ml
0340-0500 Sample bottle, PE, 500 ml
0340-1000 Sample bottle, PE, 1000 ml

8805-0608 PE tubing
8878-0608 PE tubing

5399-0004 Label Reference Sample, sheet of 24 adhesive lables
5305-0010 MiniSampler pump
0006-9506 Hose cutter
5305-0209 Adapter for glass thread GL 45