BASE-U-1 Optic USB Base Station for Pendant Loggers
The Pendant Base Station and Coupler provide fast optical infrared (IR) communication for easy logger launch and readout of HOBO Pendant loggers. The Base Station connects via USB to a host computer, while the Coupler attaches the logger to the Base Station for communications
The Pendant Base Station offloads full 64K logger in 30 seconds or a full 8K logger in 6 seconds, and is splash resistant
BASE-U-1 Optic USB Base Station for Pendant Loggers
The Optic USB Base Station is the device that is necessary to communicate between the host computer (i.e. PC) and certain models of Onset Computer Corporation’s loggers. The base station uses infrared light to transfer data, which allows loggers to be completely sealed and waterproof. The Optic USB Base Station converts the USB communication protocol into an infrared protocol used by the optic USB loggers.
A coupler (Part # COUPLER-UA) is required to connect the base station and the logger.
Plug the USB connector on the base station into an available USB port on your computer. Insert the logger and the base station into the coupler, as shown below. Make sure that the logger is inserted in the end of the coupler that has the magnet, and that the ridges on the base station and logger are aligned with the grooves in the coupler. If the logger is not aligned with the magnet, or if the ridges on the logger and base station are not aligned with the grooves in the coupler, the logger and the Optic USB Base Station will be unable to communicate.
Use the request button on product pages to build a quote request list.
| 0 Items | $0.00 |
Freephone
- Australia
- 1800 622 343
- New Zealand
- 0800 623 336