Envco – Environmental Equipment

Designed for modularity and versatility, the EX80 series, insertion electromagnetic flowmeters, have a current-sinking pulse output, which can be combined with the appropriate transmitter or indicator depending on the application. For 4-20mA analog output and display of rate and total, an FT420, pulse and 4-20mA output, can be used. For a 4-20mA analog output only, the AO55, blind 4-20mA converter, can be mounted directly onto the meter. If the EX80 series, Insertion Magmeter, is being used with a programmable controller, the output signal can be fed direct with no other conditioning required.

The EX80 series, insertion electromagnetic flowmeters, requires a special fitting, since it is not depth-adjustable as are the EX100/200 series meters. Installation in the fitting ensures correct depth placement in the pipe. Fittings and sensors are available in PVC and stainless steel.

Insertion Magmeters Specifications

Accuracy: 1% of full scale
Output: Square wave pulse, opto isolated, 500 Hz @ 20 ft/sec
Bi-Directional: Direction output, opto isolated
Empty Pipe Detection: Flow defaults to zero
Flow Range: 0.2 - 20 ft/sec (.06 - 6.09 m/sec)
Maximum Pipe Pressure: 200 PSI (13.8 bar)
Maximum Temperature:
PVC 130º F (55º C)
Stainless Steel 200º F (93º C)
Minimum Conductivity: 20 microsiemens/cm
Power: 12 - 24 Vdc, 250 mA minimum

Materials:
Mechanical: 316 SS/PVC
Electrodes: Hastelloy
Electrode plate: PVDF
Housing Cast: powder-coated aluminum
O-rings: EPDM
Size: 4" square; 6-7" total length

Insertion Magmeters Options
EX81P Fixed Depth Insertion Magmeter PVC Insertion Magmeter, for 1" to 3" size.

EX81S Fixed Depth Insertion Magmeter Stainless Steel, for 1" to 3" size

EX82P Fixed Depth Insertion Magmeter PVC Insertion Magmeter, for 4" to 10" size

EX82S Fixed Depth Insertion Magmeter Stainless Steel, for 4" to 10" size.

EX83S Fixed Depth Insertion Magmeter Stainless Steel, for 12" size.

Special Fittings (Required for Installation)
Fittings for EX81 Insertion Magmeter Series Meters:
EF81T-P-100 PVC Tee Fitting, 1" Diameter Male stub end.
EF81T-P-150 PVC Tee Fitting, 1 1/2" Diameter Male stub end.
EF81T-P-200 PVC Tee Fitting, 2" Diameter Male stub end.
EF82S-P-300-16 PVC Saddle Fitting, 3" Diameter
Installed on 16" long pipe stub. PVC saddle is supplied with Buna-N O-rings only. For chemical service, the O-ring must be removed and the saddle glued on to the pipe with PVC cement. $228

Fittings for EX81 Insertion Magmeter Series Meters:
EF81T-S-100 304 Stainless Steel Tee Fitting, 1" Diameter
EF81T-S-150 304 Stainless Steel Tee Fitting, 1 1/2" Diameter
EF81T-S-200 304 Stainless Steel Tee Fitting, 2" Diameter
EF82S-B-300 Bronze Saddle Fitting, 3" Diameter

Fittings for EX82 Insertion Electromagnetic Flowmeter Series Meters:
EF82S-P-400 PVC Saddle Fitting, 4" Diameter
EF82S-P-600 PVC Saddle Fitting, 6" Diameter
EF82S-P-800 PVC Saddle Fitting, 8" Diameter
PVC saddles are supplied with Buna-N O-rings only. For chemical service, the O-ring must be removed and the saddle glued on to the pipe with PVC cement.

Fittings for EX82 Insertion Electromagnetic Flowmeter Series Meters:
EF82S-B-400 Bronze Saddle Fitting, 4" Diameter
EF82S-F-600 Ductile Iron Saddle Fitting, 6" Diameter
EF82S-F-800 Ductile Iron Saddle Fitting, 8" Diameter
EF82S-F-1000 Ductile Iron Saddle Fitting, 10" Diameter
EF82S-F-1200 Ductile Iron Saddle Fitting, 12" Diameter

Fittings for EX82 Insertion Electromagnetic Flowmeter Series Meters:
EF82W-S-400 316 Stainless Steel Weld Fitting, 4" Diameter
EF82W-S-600 316 Stainless Steel Weld Fitting, 6" Diameter
EF82W-S-800 316 Stainless Steel Weld Fitting, 8" Diameter
EF82W-S-1000 316 Stainless Steel Weld Fitting, 10" Diameter
EF82W-S-1200 316 Stainless Steel Weld Fitting, 12" Diameter

Accessories
FT420M Pulse to 4-20 mA Output and Meter Display
FT420W Pulse to 4-20 mA Output and Wall Mounted Display
AO55M Blind 4-20 mA Converter
AO55W Blind 4-20 mA Converter and Wall Mounted Display