Greenspan Turbidity TS300 Logger
The Greenspan Analytical Turbidity Sensors provide accurate and precise turbidity reading over a range of adverse environmental conditions. The Greenspan Turbidity Sensor utilises a high gain infrared optical system to detect the back scatter intensity of suspended particles. The optical system transmits a beam of 880nm wavelength. The effective working area around the sensor is approximately 300mm forward and 50mm circumference, however this is dependant on the calibrated range.
The Sensor is packaged in a 316-grade stainless steel or Delrin tube, with O ring sealed Delrin end fittings. This design is rugged and well proven and can withstand the harsh conditions found in any field environment.
Greenspan Turbidity Sensor TS300 with onboard logging
Applications:
• Effluent monitoring
• River and stream measurements
• Estuaries and runoff studies
• Forestry and catchment monitoring
The Greenspan Turbidity Sensor utilizes a infrared optical system to detect backscatter intensity of suspended particles in a water and a reduction in water clarity. The design includes an advanced optical surface treatment to resist fouling. Digital temperature compensation technology ensures stable performance over a wide temperature range.
Standard ranges available
0-100 NTU
0-250 NTU
0-500 NTU
0-1000 NTU
Other ranges available on request
Linearity +/-2%
Temperature compensation 0-50c
Supply voltage 9-27V Reverse polarity protected-Surge protected to 2kV
Wetted materials 316 stainless steel, Delrin, acrylic
Dimensions
Length 10.8in (275mm)
1.8in (45mm) OD Stainless
1.9in (48mm) OD Delrin
optional battery pack adds extra 10.25in (260mm) to length
Weight
16.6oz (470g) Delrin
21.2oz (600g) Stainless
Outputs RS232
Quiescent current 30uA-110mA
Warm up time to stable reading 2 secs 1 sec
Software supplied AQUAGRAPH
Ordering Information
Specify Stainless or Delrin body
700-0602 TS300 Includes additional electronics for large capacity data storage, advanced calibration and linearisation program, computer compatible outputs for direct connection between sensor and PC, time and event triggering. Output is RS232
If choosing moulded cable, a standard HS7 is fitted to this sensor.
Ancillary Equipment
SDI-100 SDI-12 Converter Box - provides SDI-12 output from 4-20mA sensor
SDI-200 SDI-12 Converter Box - provides SDI-12 output from a RS232 sensor
SA-100 Communication Interface between sensor and rain gauge, auto-sampler
SDI-400 SDI-12 Interface Adapter for calibration via Windows Cal-Tech Software
TP-100 Turbidity Lens Cleaning Pump
Specify Cable length for Pump
Pump power cable: Cost per metre
TR-100 Turbidity Calibration Kit
FOR ALL TS SENSORS Optional WP7 Connector (Note a Detachable WP7 Cable will be required as well)
FOR TS300 ONLY Optional Battery Pack with WP7 (Note a Detachable WP7 Cable will be required as well)
FOR TS300 ONLY Optional Battery Pack with internal Communications connector
FOR TS300 ONLY Optional Battery Pack with cable
5BPK-102 Battery Pack Cell Replacement Kit
FOR TS300 ONLY CX18 Connector - required for usewith sampler trigger and rain gauge input
Use the request button on product pages to build a quote request list.
| 0 Items | $0.00 |
Freephone
- Australia
- 1800 622 343
- New Zealand
- 0800 623 336
News
Real Deals
Similar products
- Greenspan EC3000 Electrical Conductivity Sensor
- Greenspan pH3000 pH Sensor
- Greenspan TS3000 Turbidity Sensor
- DST micro-T
- Tidbit Temperature Data Logger V2
- HOBO Pro v2 Water Temperature Logger
- TempHion Chloride Temperature Logger
- Greenspan ORP300 ORP Logger
- Greenspan EC350 Electrical Conductivity Logger (DISCONTINUED)
- Greenspan pH300 Logger