Small Stainless Soil Water Sampler
Stainless Steel Soil Water Sampler used to collect pore water from unsaturated soil. A constant vacuum source draws pore water into the lysimeter through a porous, stainless steel membrane. Pore water samples are brought to the surface by applying vacuum or pressure. Stainless Steel Soil Water Sampler are most suitable in moist soil (tension less than 500 mbar) and can also be used below the water table.
The sampler to use when pore liquids are susceptible to PVC leaching or Alumina exchanges
There are instances where very powerful organics or in-organics (such a toxic land farms, impoundments and contamination sites) have dissolved powerful pore water constituents that will "eat", interact and react with PVC's or Alumina.
The 1906C series provide a set of samplers specifically built wholly from stainless steel. These samplers can be used to collect pore water samples from saturated to –50 cb (–50 kPa) suction level. A good product solution for these toxic organics or most inorganics.
Not recommended for sensitive chromium sampling. Choose the dual chamber model "C2" for installations greater than 10 ft (3 m) or single chamber models "C1" for sampling at depths <10 ft (3 m).
Ordering Information
1906D20V0.5C2 2.0" Dia.(5.08 cm), 18” L (45 cm), Outlet 4 and 6.5” L (10.16-16.51cm),
575 ml Sample, Duel Chamber unit
1906D20V1.0C2 2.0" Dia.(5.08 cm), 26” L (66 cm), Outlet 4 and 6.5” L (10.16-16.51cm),
1000 ml Sample, Duel Chamber unit
1906D20V1.5C2 2.0" Dia.(5.08 cm), 36” L (91.5 cm), Outlet 4 and 6.5” L (10.16-16.51cm),
1500 ml Sample, Duel Chamber unit
1906D20V0.3C1 2.0" Dia. (5.08 cm),10.7” L (27.2cm) Outlet 4 and 6.5” L (10.16-16.51cm),
260 ml Sample, Single Chamber unit
1906D08C1 0.8 Dia. (2.03 cm),.4.5” L (11.4cm) Outlet 6 and 11” L (15.24-27.94cmcm),
No holding capacity, Single Chamber unit.
Use the request button on product pages to build a quote request list.
| 0 Items | $0.00 |
Freephone
- Australia
- 1800 622 343
- New Zealand
- 0800 623 336